Burkert 8285, Instruction Manual

Page: 46 / 288

46
8285
Configuring a Calculation Block
Menu selection: Parameter setting/System control/Select Calculation Block
Setting the process variable to be calculated
Return
25.6 °C
7.20 pH
Module 8285 FRONT
Module 8285 pH/ORP
Module 8285 pH/ORP
Module 8285 BASE
Calc pH/pH +
Menu Display
Configuring a
Calculation Block
Select Calculation Block
Call up parameter setting
System control
Select module •
•
•
Depending on the modules installed
the possible combinations for
Calculation Blocks are offered •
Messages
You can activate messages for the
selected variables.
Variables which have been set as
“Off” cannot be processed further.
The measured values which shall
release a message are set using the
arrow keys
(left/right: select position,
up/down: edit number).
Confirm with
enter .
+ Calc pH/pH (Administrator)
Return
25.6 °C
7.20 pH
Difference ORP
Messages
Difference °C
Difference pH
–
Off
–
–
Off
Off
–
–
–
+ Messages (Administrator)
Return
25.6 °C
7.20 pH
Messages ORP diff
Messages Temp diff
Messages pH diff
+ Messages pH diff (Administrator)
Return
25.6 °C
7.20 pH
Failure Limit Lo
Warning Limit Hi
Warning Limit Lo
Monitoring
Variable limits
Failure Limit Hi
-01.00 pH
-00.50 pH
+00.50 pH
+01.00 pH
System control
Parameter setting (Administrator)