Burkert 8285, Instruction Manual

Page: 37 / 288

37
Menu Display
Administrator level:
Enable / lock functions
Example:
Blocking access to the configura-
tion of relay contact K1 (BASE module) from
the Operator level
Call up parameter setting
Select Administrator level.
Enter passcode (1989).
Select “Module BASE” with arrow
keys,
confirm with
enter
.
Parameter setting: Lock functions
Administrator level: Enable / lock functions for Operator level
Note:
Function check active
25.6 °C
0.003 mS/cm
Module FRONT
Module 8285 El. COND
Module 8285 pH/ORP
Module BASE
System control
Module BASE (Administrator)
Return
Contact K2 (NAMUR function check)
Contact K4 (NAMUR Failure)
Contact K3 (NAMUR maintenance)
Output current I2
Contact K1 (Limit)
Inputs OK1, OK2
Block
Module BASE (Administrator)
Return
Contact K2 (NAMUR function check)
Contact K4 (NAMUR Failure)
Contact K3 (NAMUR maintenance)
Output current I2
Contact K1 (Limit)
Inputs OK1, OK2
Release
Module BASE
Return
Contact K2 (NAMUR function check)
Contact K4 (NAMUR Failure)
Contact K3 (NAMUR maintenance)
Output current I2
Contact K1 (Limit)
Inputs OK1, OK2
Select “Contact K1” with arrow keys,
“Block” with softkey.
Now, the “Contact K1” line is
marked with the “lock” icon. This
function cannot be accessed from the
Operator level any more. The softkey
function changes to “Release”.
Call up parameter setting
Select Operator level, passcode
(1246), select “Module BASE“
Now, the locked “Contact K1” func-
tion is displayed in gray and marked
with the “lock” icon.
Parameter setting (Administrator)
Lock functions
25.6 °C
0.003 mS/cm
25.6 °C
0.003 mS/cm
25.6 °C
0.003 mS/cm