Burkert 8285, Instruction Manual

Page: 47 / 288

47
Parameter sets
Switching between parameter sets A, B
Parameter setting/System control/ Parameter sets
You can document your settings in the Excel “Parameter settings”
spreadsheet (on CD-ROM supplied with Model 8285 or download at
www.buerkert.com)
Menu Display
Select control element for
switching between the
parameter sets
Open menu selection
Parameter setting, Admin. level
Enter passcode
System control:
Select “Function control matrix” •
•
•
•
Parameter sets A, B
Open menu selection
Parameter setting, Admin. level
Enter passcode
System control
Select “Parameter sets” menu and
confirm with
enter
.
Save parameter set
The active parameter set A overwrites
the internal parameter set B.
Load parameter set
Parameter set B is loaded.
•
•
•
•
•
•
•
Return
25.6 °C
7.00 pH
Copy configuration
Function control matrix
Time/date
Parameter sets
Point of measurement
Memory card
System control (Administrator)
Parameter sets A, B
2 complete parameter sets (A, B) can be stored in the analyzer.
An icon in the measurement display shows which parameter set is active:
or
The control element for switching between the parameter sets (opto-
coupler, softkey, or PROFIBUS) is selected at “Parameter setting/System
control/Function control matrix”. The currently activated set can be signaled
by a relay contact .
25.6°C
Input OK2
7.00pH
Return Connect
Function control matrix (Administrator)
Left softkey
Right softkey
Profibus DO 2
ParSet KI rec. Fav
–
–
Return
For switchover, see
“Function control matrix”
Parameter sets
Save parameter set
25.6 °C
7.00 pH
A, B (internal)
Load parameter set
Parameter sets (Administrator)
Parameter sets A, B