Burkert 8285, Instruction Manual

Page: 62 / 288

62
8285
Save / load device configuration
Parameter setting/System control/Copy configuration
Saving / loading the complete device configuration
Parameter setting/System control/Memory card/Copy configuration
“Save“ configuration means that the complete device configuration
(except the passcodes) is written on the memory card.
“Load” configuration means that the complete device configuration
is read from the memory card and pogrammmed.
BACKUP file generated on SmartMedia card: \BACKUP\BACKUP01.PAR
Transferring the complete device configuration from one
device to further devices
Prerequisite:
The devices have the same hardware equipment,
the modules are placed in the same slots (e.g. 8285 pH/ORP in slot I,
8285 El. COND in slot II etc.).
Options:
All required options must be enabled in the “master device”,
the options in the “slave devices” can be a subset of them.
Only the option parameters are transferred, not the option itself.
When an option is enabled in a “slave device” at a later point in time,
the parameters of this option are already initialized according to the
“master device”.
Write the device configuration of the configured device on the
SmartMedia card:
Parameter setting/System control/Copy configuration/Save.
Change to maintenance menu. Select “Close memory card”.
Remove the SmartMedia card. Now you can transfer the device configura-
tion to further identically equipped devices.
To do so, insert the SmartMedia card containing the configuration in the
next device to be configured.
Select Parameter setting/System control/Copy configuration/Load.
Change to maintenance menu. Select “Close memory card”.
Remove the SmartMedia card. 1)
2)
3)
4)
5)
6)
Memory card: Copy configuration