84
Chapter 6
Burford
®
TERMINAL program
Burford
®
Corp. has developed a terminal emulation program specifically for use with the
Model 2200M/2300M tyers. This program is simply called TERMINAL.EXE and it provides
the simplest and easiest way of communicating with the tyer's controller and capturing
data to files. The program is already configured for 4800 Baud, Even Parity, 8 Data Bits
and 1 Stop Bit. It is also configured to use the COM1 serial port of the PC, which usually
has a male DB9 connector. Any of these settings can be changed as necessary. This
TERMINAL program is available on high density 3-1/2 inch diskette from Burford
®
Corp.
ask for Part Number C01287.
The tyer's controller automatically sends information to the serial port, some of which is
intended to be displayed on an optional Operator Display provided by Burford
®
Corp. The
Burford
®
TERMINAL program has been written to recognize the format of these
statements and it displays them in a box near the bottom of the screen, away from the
other output. Any other terminal emulation program cannot distinguish these statements
and they appear on the screen among all the other text.
The TERMINAL program can be run from a floppy drive or from the hard disk of the PC.
To start the program with the default settings, simply change to the directory containing
the TERMINAL.EXE file and type: TERMINAL
With the TERMINAL program running, you can press Alt-h for help on the proper
command to use if you need to use a different baud rate or a different serial port. The
help screen will show you, for instance, that to start the TERMINAL program with a setting
of 9600 baud instead of the normal 4800 baud, type: TERMINAL B9600 at the DOS
command prompt. You can exit the program at any time by pressing Alt-x.
You will not be able to see anything that you type on the screen until the tyer is running.
This is because the tyer's controller must echo your typed commands back to the PC
before will be displayed.
Summary of Contents for 2200M
