Page 37
P1011
SERVICE (cont.)
FIG. 37 TIMER TERMINALS
TIMER (cont.)
WITH RELAY (Prior to S.N. SNG0014000)
WITHOUT RELAY(After S.N. SNG0014000)
28230 092200
Removal and Replacement:
1. Remove all wires from the timer.
2. Remove the four #6-32 slotted head screws hold-
ing circuit board and dial plate on to the compo-
nent mounting bracket.
3. Remove circuit board, nylon spacers and dial
plate.
4. Install new timer circuit board as described in
Digital Timer section on the following pages.
5. Refer to Fig. 39 when reconnecting wires.
6. Install the timer setting decal provided with the
replacement timer kit, on the inside of the front
access panel.
7. Adjust timer as required. Refer to
Digital Timer
section on the following pages.
