Bull NovaScale R460 E1, User Manual, Page: 354 / 370

User Guide
353
www.bull.com
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Click [Install].
7. When [InstallShield Wizard Completed] window is displayed, click [Finished].
8. Remove the ExpressBuilder DVD from the optical disc drive and restart the
system.
Network Driver
Specify the details of the network driver.
The standard network driver that is mounted will be installed automatically, but the link
speed and duplex mode need to be specified manually.
IP addresses cannot be set when the "Internet Protocol (TCP/IP)" check box is OFF.
Check ON the "Internet Protocol (TCP/IP)" check box to be able to set IP addresses.
[When PROSet is not installed]
1. The [Local Area Connection Properties] dialog box is displayed.
■
Procedure with the standard start menu: click Start menu, [Control
Panel], [Network Connections], and [Local Area Connection].
■
Procedure with the classic start menu:
a. Click Start menu, Click [Settings] and Click [Network Connections].
The [Network Connections] dialog box is displayed.
b. Right-click [Local Area Connection] and click [Properties] from pop-
up menu.
2. Click [Configure].
The property dialog box for the network adapter is displayed.
3. Click [Advanced] and specify the same value for [Link Speed & Duplex] and
for the HUB.
4. Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1. The [Intel PROSet] dialog box appears.
* Procedure with the standard start menu
Click Start menu, point to [Control Panel], [Administrative tools], and
click [Computer Management] and then double click the [(Network
Adapter Name)] in the Network Adapter list.
* Procedure with the classic start menu
a. Click Start menu, point to [Settings] and click [Control Panel].
b. Click [Administrative tools].
c. Click [Computer Management] and double click the [(Network Adapter
Name)] in the Network Adapter list.