Bull NovaScale R460 E1, User Manual, Page: 203 / 370

User Guide
202
www.bull.com
Installation (USB File Devices)
1. See the section “Preparing Your System for Upgrade” on page 137 .
2. Pull out the server from the rack.
3. Remove the logic cover and drive cover. See “Drive Cover” on page 141 and
“Logic Cover” on page 143 .
4. Remove the PCI riser module. See “Installing and Removing a PCI Board” on
page 166 .
5. Remove the support arm from the chassis.
Figure 168: Removing the Support Arm
Note: Loosen the screws when the support arm comes up.
Press firmly the support arm before removing the screws.
6. Remove the processor duct from the chassis.
Figure 169: Removing the Processor Air Duct