Bull NovaScale R460 E1, User Manual, Page: 115 / 370

User Guide
114
www.bull.com
6. The VD 0 is created in the DG 0 as shown in the screen below.
Figure 61: Virtual Disk Creation
7. Make sure that the VD is created correctly, and click [Accept] at the lower right
of the screen.
8. The confirmation message "Save this Configuration?" appears. Click "Yes" to
save the configuration.
9. The confirmation message "All data on the new Virtual Disks will be lost.
Want to Initialize?" appears. Select "Yes".
10. The "Virtual Disks" operation screen is displayed. If no other operation is
required, click [Home].