Bull NovaScale R460 E1, User Manual, Page: 159 / 370

User Guide
158
www.bull.com
11. Reinstall the support arm.
Figure 110: Reinstalling the Support Arm
A: USB cable
B: Support Arm
Notes:
■
Make sure the support arm holds the processor duct firmly
(see figure below).
■
When the support arm comes up, you may lose the screws.
Press firmly the support arm before tightening the screws.
Figure 111: Support Arm (Detail)
A: Support Arm
B: Processor Duct
12. Install the components you removed previously.
13. Power on the server and verify that POST displays no error messages.
If POST displays an error message, take a note on the message and see the
POST error messages listed in
“POST Error Messages” on page 200 .
A B
A
B