Bull NovaScale R460 E1, User Manual, Page: 22 / 370

User Guide
21
www.bull.com
Front View with Front Bezel Removed
Figure 4: Front View with Front Bezel Remved
1
Handles (1 at the right and left each)
Hold the handles when dismounting/mounting the server from/in the rack.
2 Hard disk bays
Mount hard disks in the bays. Each number following the bold-faced number indicates the SCSI ID or SAS
port number. In the standard configuration, hard disk drive trays are mounted in all the bays.
3 Disk lamp (green/amber)
Lights green when the hard disk is being accessed.
Lights amber when the hard disk fails.
Flashes alternatively green and amber during the build process (only in RAID system).
4 Optical disc drive
This drive reads/writes data from the optical disc drive.
4-1 Emergency hole
4-2 Disk access lamp
4-3 CD tray eject button
5 USB connectors (2 ports)
Connect USB devices via these connectors.
6
Serial port B (COM B) connector
Used to communicate with the remote console via direct connection.
7 Backup device bay
Mount an optional DAT or AIT drive in this bay.
8
Floppy disk drive bay
Mount an optional floppy disk drive in this bay.
9 UID (Unit ID) switch
Press this switch to turn on/off the UID lamps on the front and rear panels of the server. Pressing the switch
once turns on the lamps. Pressing it again turns them off. (The LED also goes on or flashes when the
software issues a command.)
10 Power switch
0
1
2
3
4
5
1
1
2-0 2-1 2-2
2-3 2-4 2-5
4-2 4-3 4-1
9 5 6
9
10
11
12
12
12
8
3