manualshive.com logo in svg

Bull NovaScale R460 E1, User Manual, Page: 312 / 370

Share
Download
Bull NovaScale R460 E1 User Manual Download Page 312

User Guide 

311 

www.bull.com

Installing the RAID controller Driver 
(LSILogic MegaRAID SAS 8480E)

The RAID controller driver will be installed automatically.

Installing the Adaptec 29320 Controller Board

The driver may sometimes not be installed during the OS installation. In this case,
please install the driver as described in the procedure below.

1. 

Start [Device Manager] from [Start] menu 

→

 [Control Panel] 

→

[Administrative Tools]

→

 [Computer Management].

2. 

Double-click the SCSI Controller which the Device Manager lists as “Other

device”.

3. 

Click [Update Driver].

4. 

When the "Update Device Driver Wizard" appears, select "No, not this time"

and click [Next].

5. 

Select "Install from a list or specific location [Advanced]" and click [Next].

6. 

Select "Don't search. I will choose the driver to install" and click [Next].

7. 

Select "SCSI and RAID controller" and click [Next].

8. 

Click [Have Disk..].

9. 

Insert the "Windows Server 2003 OEM-Disk for ExpressBuilder" into the

floppy disk drive, enter "a:\" into "copy manufacturer's file from:" and click
[OK].

10. 

Specify the following driver and click [Next].

[Adaptec SCSI Card 29320ALP -Ultra320 SCSI] (When N8103-75 board is
installed.)

The installation of the driver is completed. Restart the system according to the on-
screen messages.

Summary of Contents for NovaScale R460 E1



















































































































































































































































































































































































Reviews:

No comments