Bull Escala Power7 Series Manual Download Page 90 | Manualshive

Page: 90 / 148

background image

Related reference

:

“Connecting PCIe storage enclosures with PCIe cables” on page 87
Learn how PCIe cables are used to connect PCIe storage enclosures to servers.

Preparing to connect your PCIe storage enclosures

Use this information to plan the installation and configuration of your PCI Express (PCIe) storage
enclosures.

About this task

This topic provides information about connecting your PCIe storage enclosure with PCIe cables. You can
perform this task yourself or contact a service provider for this service.

To prepare to connect the PCIe storage enclosures, complete the following steps:

Procedure

1.

Decide where you want to install the new PCIe storage enclosures. For details, see “Where to install a
PCIe storage enclosure.”

2.

Unpack the PCIe storage enclosures by using the unpacking instructions.

3.

Identify the cables. For details, see “Identifying PCIe cables.”

4.

Plan for cable layout. When you decide where to place the cables, follow your site plan and keep the
following items in mind:

v

Avoid creating a safety hazard.

v

Avoid damaging the cables.

v

Avoid placing cables parallel to high-voltage lines.

5.

Continue with “Connecting a PCIe storage enclosure” on page 80.

Where to install a PCIe storage enclosure

Before you begin the installation process, plan where you want to install the PCIe storage enclosures.

When deciding where to install a PCIe storage enclosure, consider several elements that include size,
security, and environmental factors. For more information, see Site preparation and physical planning
(http://publib.boulder.ibm.com/infocenter/systems/scope/hw/topic/p7ebe/
p7ebegenconsiderations.htm).

If you plan to install your PCIe storage enclosure in a rack, see Racks and rack features
(http://publib.boulder.ibm.com/infocenter/systems/scope/hw/topic/p7hbf/p7hbf_all_kickoff.htm).

Identifying PCIe cables

Use this information to help identify the PCIe cables for the PCIe storage enclosure.

The system uses PCIe cables to transmit data and control information to and from the PCIe storage
enclosure.

78

Enclosures and expansion units

«
...
88
89
90
91
92
...
»

Summary of Contents for Escala Power7 Series





















































































































































Reviews:

No comments

Related manuals for Escala Power7 Series

RabbitCore RCM4400W

Brand: Rabbit Pages: 126

Brand: XtendLan Pages: 228

Brand: AXAGO Pages: 2

Industrial Network Track OSI

Brand: GarrettCom Pages: 10

2410SA - Serial ATA RAID Controller

Brand: Adaptec Pages: 14

Digital Loudspeaker

Brand: Dolby Laboratories Pages: 4

Brand: Xilinx Pages: 43

ACC-BKT-AX-BEAM

Brand: Extreme Networks Pages: 35

Brand: ADTRAN Pages: 20

WISENET XRN-1610

Brand: Hanwha Techwin Pages: 88

Embedded Intelligent Module SX-560

Brand: Silex technology Pages: 110

Brand: Abov Pages: 8

Brand: Cambium Networks Pages: 7

Brand: Velleman Pages: 14

Pentium Pro Family

Brand: Intel Pages: 328

Brand: Eagle Eye Pages: 61

Brand: Navnet Pages: 28

Brand: Navitar Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands