manualshive.com logo in svg

Buffalo TeraStation WSS WSH5010N6, User Manual, Page: 22 / 103

Share
Download
Buffalo TeraStation WSS WSH5010N6 User Manual Download Page 22

2 

Select the desired volume type under “RAID Mode” and click 

Build New RAID Array

.

3 

Click 

OK

 when a warning message is displayed.

4 

Click 

OK

 again. Creating the volume will begin. The TeraStation will shut down automatically after about a 

minute.

5 

When the power LED is distinguished, press the power button on the TeraStation to turn it on.

6 

Connect Windows Storage Server via the remote desktop.

7 

Click the Start button and click 

RAID Builder

.

8 

Click 

Format RAID

 and click 

OK

.

After creating the volume is completed, refer to chapter 1 to create a shared folder.

Notes: 

•  If the I18 message is displayed under “ERROR” on Buffalo Dashboard, the volume has not been created yet. Wait 

until the message disappears and try from the step 7 again.

•  You can also format the volume using the “Format RAID” button on RAID Builder.

21

Summary of Contents for TeraStation WSS WSH5010N6








































































































Reviews:

No comments