TS1400R
9
10
13
16 7 8
14
11
13
4
4 16 17
19 10 1 4 5
3 2 4 6
7
18
1
Power LED ( )
The power LED will light up white while the TeraStation is on.
The power LED blinks white during boot or shutdown.
For TS1200D and TS1400D models, if an error occurs, the power LED will blink red. If there is a status message,
the power LED will blink amber. If there is a new firmware available, the power LED will glow amber.
2
Function LED (
)
This LED glows while the TeraStation is being initialized and while dismounting USB devices.
3
Function Button
Use this button for Direct Copy, dismounting USB devices, rebuilding RAID arrays, and initializing settings.
4
Drive Status LED
If an error occurs on a drive, its corresponding LED will light or blink. For TS1400D and TS1400R models, this
LED will blink green to indicate that drive status is normal.
5
Power Switch/Power Button ( )
For TS1200D models, move the switch up and down to power on and off. For TS1400D and TS1400R models,
press the button to power on and hold it down until the TeraStation beeps twice to power off.
If your TS1400D or TS1400R model beeps, you can press the power button once to stop the beeping.
6
Init Button
Use this button when applying saved settings from a USB drive.
7
USB 3.0 Port (
)
Compatible Buffalo USB 3.0 hard drives, USB flash drives, digital cameras, and USB printers can be connected.
USB hubs are not supported.
8
USB 2.0 Port (
)
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, USB UPS connection, and USB printers
can be connected. USB hubs are not supported.
9
LAN Port (
)
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
10
Link and Activity LED
This LED shows network activity. It blinks green when the TeraStation is accessed over the network.
7
Summary of Contents for TeraStation 1000
