5
Click
Browse
and select the shared folder where the link will be created in "Target Shared Folder". Click
OK
.
6
Click
OK
.
Under the selected shared folder, a folder named "system_log" will now contain the logs.
Updating the Firmware
If a new firmware is available, a message is displayed when the TeraStation boots. You can update the firmware by
following the procedure below:
1
In Settings, click
Management
.
2
Click
to the right of "Update".
3
Click
Install Update
.
You can also download the latest firmware from the Buffalo website.
Note:
Settings is not available while the firmware is updating. Don't try to access Settings from another computer
until the update is complete.
Name, Date, Time, and Language
Configure the TeraStation's hostname, date, time, and language as shown below.
1
In Settings, click
Management
.
2
Click
to the right of "Name/Time/Language".
3
Click
Edit
.
104
Summary of Contents for TeraStation 1000
