Name
Description
TeraStation Name
Browse Shares
Opens the TeraStation's shared folder "share".
Settings
Opens Settings for the selected TeraStation.
Properties
Opens the TeraStation's properties page.
Map Share
Assigns the TeraStation's shared folder as a network drive.
Disconnect Share
Unmaps the network drive.
Create Shortcut
Creates a shortcut icon on the desktop to the shared
folder "share".
I'm here
*
Causes your TeraStation to beep.
Refresh
Refreshes list of NAS devices on the network.
Browse Shares
Shows a list of shared folders on the selected NAS device.
Exit
Exits NAS Navigator2.
*"I'm here" is available on TS1400D and TS1400R models. When clicked, the TeraStation will beep and its power,
function, and drive status LEDs will blink red.
The following tasks may be performed from the TeraStation's properties page.
Name
Description
Configuration
Click
Settings
to open the configuration interface.
IP Address
Check
Use DHCP
to assign an IP address from the DHCP
server automatically. If there is no DHCP server on the
network, you cannot use this function. Check
Renew IP
address
to obtain an IP address from the DHCP server.
Uncheck
Use DHCP
and enter an IP address, subnet mask,
and default gateway to manually configure them.
Mount as Network Drive
You can easily map a shared folder as a network drive using NAS Navigator2.
112
Summary of Contents for TeraStation 1000
