- An incomplete file may be copied and the file can no longer be deleted. If this happens, restart the TeraStation,
delete the file, and perform the copy operation again.
• When you access a shared folder from a Windows PC, you may be asked to enter a username and password. In
such a case, enter "guest" for the username and the password is blank.
Recycle Bin
To protect your data from accidental deletion, you may configure your TeraStation to use a recycle bin instead of
deleting files immediately. The recycle bin will only work with SMB connections. To empty the recycle bin, click
File
Sharing
-
Folder Setup
-
Empty Recycle Bin
in Settings.
Note:
You can prevent guests and other users from emptying the trash by navigating to
File Sharing
-
SMB
-
Recycle
Bin Permissions
and selecting "Administrator only".
Read-Only Shares
By default, new shares are set with read and write access, but you may change the attribute to
Read Only
in
Attribute
.
Read-only shares and HFS Plus-formatted USB hard drives will have "(Read Only)" added to comments in Explorer.
Note:
Configure read-only file attribute in Settings. Configuring them from within Windows is not supported and
may cause unexpected behavior.
Hidden Shares
If hidden shares are enabled, shared SMB folders will not be displayed in Network, and only certain users are allowed
to access them. To hide a shared SMB folder, follow the instructions below.
1
In Settings, navigate to
File Sharing
-
Folder Setup
and choose a shared folder or a USB drive to configure
hidden shares.
2
Select the "Hidden Share (SMB Only)" checkbox and click
OK
.
Notes:
• If protocols other than "SMB" or "Backup" under "LAN Protocol Support" are enabled, the hidden shares option
will be grayed out and cannot be selected.
• Configure hidden share attribute in Settings. Configuring them from within Windows is not supported and may
cause unexpected behavior.
To access a hidden folder, open File Explorer in your computer and enter "\\TeraStation name\Shared folder name$\"
for the name. For example, if the TeraStation name is "TSXXX001" and the shared folder name is "share", enter "\\
TSXXX001\share$\" to open it.
Configuring Users
Adding a User
Note:
The TeraStation can register a maximum 300 of users, which includes the default users "admin" and "guest".
1
In Settings, click
File Sharing
.
2
Click
to the right of "Users".
18
Summary of Contents for TeraStation 1000
