3
Select the drive to dismount and click
Dismount Disk
.
4
The "Confirm Operation" screen will open. Enter the confirmation number, then click
OK
. It will take about 30
seconds for the drive to be dismounted.
5
When the following message is displayed, it is safe to unplug the drive.
Note:
To remount the drive, unplug it and then plug it back in when the function LED extinguishes.
Checking Drives
A drive check tests the data on a drive in the TeraStation or one that is connected via USB for integrity. Errors are
fixed automatically. With large drives, a drive check may run for many hours. Shared folders cannot be accessed
during a drive check. Do not turn off the TeraStation until the drive check is finished. Use the procedure below to run
a drive check.
1
In Settings, click
Drives
.
2
Select
Drives
to check an internal drive or
USB Drives
to check an external drive.
42
Summary of Contents for TeraStation 1000
