July 2013 © British Telecommunications plc 2013
Page 32
General Purpose Outputs.
GPOP1 Type. Default = BSIA form 175.
o
BSIA form 175. Operate on either path fail, and respond to panel
interrogation on pin 11.
o
Standard line Fault 1. Operate on either path fail.
o
Standard line fault 2. Operate on both paths fail
o
Primary path fault. Operate when the primary path fails. (use with GPOP2).
GPOP2 Type. Default = Relay 2 control.
o
Relay 2 control
o
Secondary path fault. (use with GPOP1).
GPOP2 Mode. Default = Toggle. (This option only available if GPOP2 type is set to
Relay 2 control)
o
Toggle = GPOP2 follows on and off commands from ARC.
o
Pulse 1 - 10s = GPOP2 pulses for a set duration with each ARC command
GPOP3 Type. Default RPS (Return path signalling)
o
Relay 1 control
o
RPS
GPOP3 Mode. Default = Toggle. (This option only available if GPOP3 type is set to
Relay 1 control)
o
Toggle = GPOP3 follows on and off commands from ARC.
o
Pulse 1 - 10s = GPOP3 pulses for a set duration with each ARC command
GPOP1-3 sense. Default = 1&3 ticked. Tick for low when normal and high when
operated. Untick for high when normal and low when operated.
Galaxy mode for GPOP1&2. Default = unticked.
o
Unticked = GPOP1 & 2 have an internal 10K pull up resistor.
o
Ticked = GPOP1 & 2 have an internal 1K series resistor and no pull up.