July 2013 © British Telecommunications plc 2013
Page 35
Figure 20 - serial connection to Galaxy panel allowing remote panel access from Galaxy
Remote Service Suite
Roaming SIMs
The unit will auto detect the sim type that is present in the unit. Most units are supplied pre
fitted with a Roaming Sim. Where a Roaming Sim is fitted then the unit will switch between
GPRS networks to maintain connectivity should connectivity be lost on the current network.
The unit will search the available networks for a signal stronger than the “Roaming CSQ limit”
at unit start up. (Default 19)
Should the unit lose connectivity with the BT Redcare platforms, or lose registration with the
current base station, then the unit will roam onto the next available GPRS network.
Dial capture board
The dial capture board is a module that can be added to a BT Redcare Secure Mk3 unit to
enable interfacing with an alarm panel’s digital communicator. The alarm panel can then send
SIA, CID or Fast Format messages through the Secure Mk3 unit to the Alarm receiving centre.
The dial capture board can also be used for upload download UDL allowing remote access
with some types of alarm panel.
