Bryton Rider 800, User Manual

Page: 36 / 59

36 Settings
Back to Top
GPS System
Rider S500 has full GNSS (Global Navigation Satellite System) support including GPS,
GLONASS (Russia), BDS (China), QZSS (Japan) and Galileo (EU). You can select a suitable
GPS Mode according to your location to enhance accuracy or better suit your needs.
1. Select in the home page.
2. Select Bike Settings.
3. Select a bike
> GPS System.
Enable GPS System
1. Turn on GPS System status.
2. Select a suitable satellite navigation system.
x
GPS+QZSS+Glonass : Choose this
combination if you’re in NON Asia-Pacific
region for the best accuracy.
x
GPS+QZSS+Beidou :
This combination will provide the best
accuracy in Asia-Pacific region.
x
GPS+QZSS Navigation Satellite
System: It's sufficient for regular usages,
while consuming less battery power than
the 2 sets above.
x
Power Saving : Trade-off accuracy to
achieve maximum battery life. Use this
mode in open sky.
Disable GPS System
1. Turn off GPS to save battery power when
GPS signal is not available, or when GPS
information is not mandatory (such as
indoor training).
Speed Priority
1. Select in the home page.
2. Find
Bike Settings.
3. Choose a bike > Speed Priority.
4. Switch speed source to order priorities.
Ultra-High Accuracy
Full GNSS:
GPS, Glonass, Beidou
QZSS, Galileo
High Accuracy
Normal
Status
GPS SYSTEM
GPS
QZSS
Galileo
Beidou
GPS+QZSS+Galileos
GPS
QZSS
Galileo
Glonass
NOTE: If the GPS signal is not fixed, a “Please go outdoors to an open area to acquire GPS
satellite signal.” message will appear on the screen. Check if GPS is on and make sure you
step outside to acquire signal.
SPEED PRIORITY
Priority 1
GPS
Priority 2
SPD/CAD
Priority 3
SPD