40
Settings
Manage Sensors via Bryton Active
1. Select Settings in the home page.
2. Find
Sensors.
Add New Sensors
1. Select
Add Sensor
to add new sensors.
2. Choose any type of sensor that you would
like to pair with.
3. To pair sensors with your device, please
have Bryton Smart Sensors installed first,
then wear a heart rate monitor or rotate
the crank and wheel a few times to wake
Bryton Smart Sensors up.
4. For Bike Radars, E-bikes, and Ess/Di2,
please turn the power on before starting
pairing.
5. Let the device detect sensors automatically
or enter a sensor ID manually.
6. Pick a detected sensor you would like to
pair with then select
OK
to save.
Manage Sensors
1. Select the sensor you would like to
edit.
2. Turn on or off the status to activate or
deactivate the sensor.
3. Edit the name by clicking
.
4. Remove the sensor by pressing
Remove
.
Switch Sensors
1. Select the sensor you would like to switch
to.
2. Press
Connect
to pair the sensor.
NOTE:
Sensors only need to be switched if they are in the same type and both are already
added in the list.
Summary of Contents for Rider 800
Page 1: ...User Manual ...
