Appendix F
Printing with Software
Revision A
5K-LE OWNERS MANUAL
Section F - 11
Software Interface sample:
dBASE IV ver 1.0
Upon entering dBASE, the
dBASE Control Panel
will be displayed.
To Create a Label, move cursor to the
labels
column and select
<create>
.
A label will be displayed on the screen.
Press
ALT & D
, to pull down the Dimensions menu, the following settings should be entered;
Width of label
45
Height of label
Set to the number of lines in your address
Indentation
0
Lines between labels
1
Space between columns
1
Columns of labels
1
Press
ESC
Add fields to label using the instructions at the bottom of the screen.
Once you have completed your layout, press
ALT & L
to pull down the Layout menu and
select;
Save this label design.
When this label format is saved, it will be displayed as a file under the labels column in the
control panel.
To Print labels;
Activate a data file;
Select the label file you created under the labels column;
Follow menu directions to print.
NOTE: dBase IV does a CR & LF before each address, therefore you must do the
following:
IF SEVEN LINE ADDRESS, DO A FF BEFORE THE START OF THE NAME,
Example
<CR>
<LF>
CHR(12)+NAME
P/N
90-00852-001