manualshive.com logo in svg

Bryce 5K-LE, Owner'S Manual, Page: 36 / 129

Share
Download
Bryce 5K-LE Owner'S Manual Download Page 36

 

 

Printer Menu System 

code.

 

 

5. ADDRESS RECOVERY 

When something goes wrong while printing use this option to direct the printer to re-print up to 20 of the 
last records or to clear the printers memory of all records. 

Menu Items 

Selections 

Explanation 

A. Get Addresses

 

NONE TO RECOVER

 

or  

00

 to 

20

  

Press the [

Enter]

 

button to select the 
record and advance the 
display to the next to 
last record. 

This option retrieves up to 20 records from the data 
buffer.  

The display will say 00: and show the first 16 
characters of the last address printed. If 

NONE TO

 

RECOVER

 is first displayed then the data buffer is 

empty. 

B. Clear Memory

 

YES

 or 

NO

 

This option removes any data left in the data buffer. 
The alternative way to clear data from the Data 
Buffer is to press the 

[+] 

plus and 

[–]

 minus buttons 

simultaneously. 

 

6. CLEAR COUNTER 

Use this option to clear the piece (batch) counter back to zero. 

Menu Items 

Selections 

Explanation 

 

YES

 or 

NO

 

This option resets the counter to zero on the display. 
Select No to leave the current number of pieces 
printed (

pcs

) on the LCD display.

 

 

Revision A 

5K-LE OWNERS MANUAL

 

Section 6 - 7 

 P/N 

90-00852-001 

Summary of Contents for 5K-LE


































































































































Reviews:

No comments