Trying Out the Printer
Push the Slider Assembly left or right to move the slider to a
new position on the shaft. Place the Sliders to 1/4 of an inch
(6.35 mm) from the left and right edges of the media. It is
important to check that the Sliders do not contact any printed
information on the media. If the rollers do roll over any
printed areas they will act as a brush with paint and smear the
print. Move the rollers in more or out more toward the nearest
clear zone (non printing area of the media).
Adjustment
of the Left
Hand and
Right Hand
Slider
Assembly
The Paper Catch Assembly will stack up to five inches (12.7
cm) of media before it is necessary to remove the stack from
the paper catch assembly. If the paper catch is not emptied
regularly then there is the potential for the stack to be out of
sequence, particularly when the printer is printing toward the
top of the media.
Output
Stack
Height
Revision A
5K-LE OWNERS MANUAL
Section 4 - 12
P/N
90-00852-001