Printer Menu System
SERVICE MENU
Use this menu for adjusting the print, checking the transport motor, the shuttle motor, the sensors and
testing the display for proper functionality and to perform a corrective alignment for the Lower Right
Barcode and addresses.
The menu options that are preceded with a star or Asterisk (*) are the printers’ current settings.
Press the [
Menu]
button and the
[-]
Minus button simultaneously until the SERVICE MENU is displayed
on the first line of the LCD. Select the desired menu option when it appears on the second line of the
LCD.
1. LEFT JUSTIFY
The following steps are for synchronizing the left edge or left justification of the lines of print.
Selections Explanation
0
to
9
Press the [
Test Env.]
button to
print out a Test Pattern. Check the
Test Pattern to determine which
Print Cartridges are in need of
Vertical Synchronization.
Use this option when the left edge of the address needs left
justification.
The following is an example of how to adjust print so each lines starts in the same place.
Example:
On the right
is an example of a three (3) line address of A's. Where the left
edge of line 1 did not align with line 2 which did not align with line 3.
Example
: AAAA
AAAA
AAAA
Print out an adjust print Test Pattern by pressing the
[Test Env.]
button
while in the
Left Justify
menu. The printer will print a Test Pattern like
the example to the right.
Select the pattern
with the vertical line
0 1 2 3 4 5 6 7 8 9
| | | | | | | | | |
| | | | | | | |
| |
| | | | | | | | | |
| | | |
| |
| |
| |
The left justify test pattern consists of four rows, each
row has a series of ten vertical lines. Select the left
justify test pattern where a line from each row is
printed directly above the other forming a long
straight vertical line. In this example the correct
number is 5.
Scroll through the Left Justify menu option displays
5
is on the LCD panel.
Revision A
5K-LE OWNERS MANUAL
Section 6 - 14
P/N
90-00852-001