Bryce 30K, User Manual, Page: 22 / 119

Printer Tips
Head 2 Bank A
Head 1 Bank A
Head 3 Bank A
Head 2 Bank A
Each bank of three Print Cartridges has to be synchronized to
print graphics, scaleable fonts or to justify the left edge of
print. If the Print Cartridges are not synchronized anything
that requires two or three Print Cartridges to line up a left edge
or to print next to each other may print to the left of one
another or on top of each other. When installing a new print
cartridge or cartridges into a 3 Print Head Assembly it may be
necessary to realign it with the other print cartridges.
Synchronizing the print cartridges in
the Print Head Assemblies is
accomplished using the Service
Menu option Adjust Print.
Synchronizing
new Print
Cartridges in
the Print Head
Assembly
The following procedures will refer
to the left 3 Print Head Assembly as
Bank A, and the right 3 Print Head
Assembly as Bank B. Synchronize
each Bank of Print Cartridges by
aligning the Test Pattern that is
printed by each of the Print
Cartridges. Each Print Cartridge will
print a Test Pattern like the one
below.
Each carriage uses the leftmost Print Cartridge of the three to
synchronize the other two Print Cartridges. Counting from left
to right, the leftmost Print Cartridge in Bank A is referred to
as Head 1 and the leftmost Print Cartridge for Bank B is
referred to as Head 4.
The Test Pattern for a bank of Print Cartridges should look
like the following example when all three print cartridges are
synchronized.
Note:
Have several
pieces of media to use
when synchronizing
the Print Cartridges.
Revision C 30K USERS MANUAL Section 4 -
P/N 90-00203-001
4