Technical data
and start-up
EVB1-350/400-40-HP
88
PROCEDURE STEP
ILLUSTRATION / OTHER INFORMATION
13.
Press the
Disconnect
button (1).
The connection to the battery is disconnected.
With this
Boot Mode
is ended and a reset of the
battery is activated. The battery is ready for
operation after the reset.
Alternatively, settings can be applied using
Options
– Auto Disconnect
(2) to ensure that in
future the connection is automatically
disconnected after firmware updates have been
completed.
INFORMATION
To finish the firmware update, the following steps must be carried out:
14.
Carry out a reset at terminal 15 (switched positive).
---
15.
Carry out a reset at terminal 30 (permanent positive).
---
INSTRUCTION
Check the configuration of the battery immediately after the firmware update has taken place. Under
no circumstances should you operate the battery without checking the configuration beforehand!
Some parameters could be lost through the update and the battery function could be compromised
as a result. This could subsequently lead to damage to the battery!
