61
Technical data
and start-up
EVB1-350/400-40-HP
PROCEDURE STEP
ILLUSTRATION / OTHER INFORMATION
4.
Connect the control plug (1) to the female
connector (2) of the battery. Check the control plug
(1) for secure fit (locking (3) activated).
5.
Install the CAN dongle.
---
6.
Install the provided software
PCANview.
This software is recommended by BRUSA.
Customer-specific software can of course be
used as an alternative for this.
---
7.
Install the provided software
PARAM
(
PARAM.msi
).
See the manual
Bedienung_PARAM.pdf
Using
properties
check whether the shortcut
PARAM
was installed on the right path (1). The
path (1) may need to be adapted to suit the
installation path.
8.
Start the software
BMS_Monitor
(
BMS_Monitor_D.exe
).
---
9.
Switch terminal 30 to
high.
---
