Brusa BSC623-12V-B Series, Technical Information And Start-Up

Page: 56 / 83

Technical information
and start-up
BSC624-12V-B
56
9
Installation / initial start-up
DANGER
High voltage!
Danger to life!

Never touch the HV wires or HV connections without ensuring the absence of voltage
beforehand!

The device may only be connected by a qualified electrician!

Safety installations must never be by-passed or circumvented! Any resulting malfunctions could
have life threatening consequences!
INSTRUCTION

All electrical connections are to be fixed within a distance of < 30 cm from the device with a strain
relief in order to protect the cable and/or the cable tree at the control connector against vibration
and consequential damage.

Ensure that the HV battery used has a pre-charging unit. Any connection without pre-charging
unit may cause the formation of sparks / voltage peaks and thus damage to the device!
Procedure step Illustration / other information
1.
Mechanically install the device in its specified
position.
Please refer to the installation instructions
See chap.
6.9 Dimensions and installation
information
---
2.
Connect the cooling water hoses (1).
See chap. 8.5 Cooling system
3.
Ventilate the cooling system.
Ensure that no trapped air is present in the
cooling system!
See chap. 9.2 Ventilating the cooling system
---