Technical information
and start-up
BSC624-12V-B
70
Procedure step
Illustration / other information
4.
In field (1), enter the value
2
(automatic mode).
For the autonomous operation without CAN
connection, value = 2 must be set.
5.
In field (1), enter the duration in seconds during
which a HV voltage must be present until the CAN-
less mode is started (HV-ready time).
Requirement:
The device is released via DI0.
6.
In field (1), enter the LV which is applicable for
commanding the automatic mode (AUTO ULV com)
