4
OPERATING INSTRUCTIONS
LIGHT FUNCTION
To turn the lantern ON, press the main button.
Adjust the light mode (High / Low / Red / Off) by pressing the main button.
To turn the lantern OFF, press the main button once after Red light mode.
AUDIO FUNCTION
To play audio from a BLUETOOTH® device, you need to first pair the device with the
lantern speaker.
A. On your Bluetooth device, turn on BLUETOOTH and scan for devices in its Bluetooth
menu.
B. Turn BLUETOOTH switch to ‘on’ position on CAMP ROCKER inside USB charging door.
The lantern speaker is discoverable for 2 minutes and is ready for pairing. A short
sound will indicate the BLUETOOTH is on.
C. The device code of this lantern “BRUNTON C-ROCKER” will appear on the device list
of your BLUETOOTH device, select the lantern. The BLUETOOTH status will show on
your BLUETOOTH menu after pairing is established. The lantern speaker is ready
to play music.
D. Adjust volume using controls on your BLUETOOTH device.
If the BLUETOOTH turns off after five minutes without playing audio, it enters power
saving mode. Slide the power switch off and then turn on to wake the BLUETOOTH, and
try pairing your device again. Repeat step 3.
The lantern speaker operates with a single pair devices mode. If you pair the speaker
with another device, the device least recently connected needs to be un-paired with
the speaker first. Repeat steps 2 and 3 above
Connect audio cable (not included) directly to AUX audio plug to play music without
BLUETOOTH connection.
B
C
>
>
SEARCHING
A
ON
Select this
CONNECT
BRUNTON C-ROCKER
PAIRED
POWER BANK FUNCTION
1. Select the suitable USB charging cable (different devices require
different charging cables for charging).
2. Plug the USB cable into lantern USB output port, then plug the other side of the
cable into the charging device (mobile, tablet, etc.) The device will then start
charging.
BR-Manual-CampRocker 6.0.indd 4
9/9/15 3:45 PM
