GS-X Pinsetter w/Advanced (CE) Guarding Operation Manual
9
Care and Maintenance
The lenses for the sensors must be cleaned regularly or if dirty. Avoid scratching the lenses and the
formation of droplets on the lenses as these could change the optical properties.
• Do not use aggressive cleaning agents.
• Do not use abrasive cleaning agents.
Static charges cause dust particles to be attracted to the lens. You can prevent this effect by using the
antistatic plastic cleaner.
How to clean the lens:
• Use a clean and soft brush to remove dust from the lens.
• Then wipe the lens with a clean and damp cloth.
After cleaning, check the position of sender and receiver to make sure that it is not possible to climb
over, creep below or stand behind the protective device.
