Bruker SampleXpress, User Manual, Page: 89 / 174

89 Z31900_00_01
10 Maintenance
10.1 Safety
Samples
Electrical System
DANGER
Danger of injury from glass tube breakage!
Broken glass tubes may cause minor injuries or material damage, but may also result
in a life threatening situation if hazardous substances are used.
f If a glass tube breaks, refer to the corresponding precautions and cleaning/disin-
fection instructions.
f Wear protective equipment.
f Perform all tasks with the cassette and glass tubes carefully.
f Before carrying out any maintenance work, remove the samples and use dummy
samples if necessary.
f
Strictly observe the correct sample adjustment, i.e. the maximum sample height.
f Always transport the cassette with the cover. Never turn the cassette upside down
or on it‘s side.
The laboratory supervisor is responsible for:
f Establishing and enforcing standard sample handling and cleaning procedures.
f
Establishing and enforcing the use of protective clothing and equipment.
f Training laboratory personnel.
f Preparing an emergency plan.
WARNING
Electrical hazard from electrical shock!
A life threatening shock may result when the housing is open during operation.
f Disconnect the device from the electrical power supply before opening the device.
Use a voltmeter to verify that the device is not under power!
f Be sure that the power supply cannot be reconnected without notice.
f The housing must be closed during operation.