manualshive.com logo in svg

Bruker SampleXpress, User Manual, Page: 87 / 174

Share
Download
Bruker SampleXpress User Manual Download Page 87

87

Z31900_00_01

Operation

9.8

Working in Random Access Mode

When the cover is not used, the sample does not need to be added at the Operator 
Access Position, but can be added to any empty position. In this Random Access Mode, 
the main screen is different than the menu in Single Access Mode.

Figure 9.47 Main Menu in Random Access Mode

Use the 

Left

 and 

Right

 buttons to move the conveyor chain left or right. By pressing one 

of these buttons for a short interval, the chain moves one position. Likewise, by pressing 
one of the buttons for a longer interval the chain moves for as long as the button is 
pressed. During this time only gray positions are displayed, the system does not show 
which positions are empty or filled.

For the 

Remove Cassette

 button see 

"Removing the Cassette" on page 80

.

For the 

Settings

 button see 

"The Settings Window" on page 82

.

Summary of Contents for SampleXpress















































































































































































Reviews:

No comments