Bruker SampleXpress User Manual Download Page 22

Page: 22 / 174

Z31900_00_01

Safety

3.5.6

Dangers from Gases Under Pressure

Pneumatics

Suffocation

WARNING

Danger of injury due to movements caused by stored pneumatic forces!

Pneumatically driven components may move unexpectedly due to stored residual
forces, causing serious injuries.

Work on the pneumatics system must only be carried out by trained pneumatics
technicians.

Before starting work on the pneumatics system, ensure that it has been com-
pletely depressurised. The pressure accumulator must be completely relieved.

WARNING

Accident hazard from asphyxiation!

A break in the pneumatic hose may result in the uncontrolled exit of nitrogen into the
laboratory.

An oxygen warning device should be present in the laboratory if the device is
operated with nitrogen.

Note that leakage from the main supply line cannot be stopped by the

SampleXpress!

Summary of Contents for SampleXpress















































































































































































Search results

Summary of Contents for SampleXpress

Reviews:

Bruker SampleXpress, User Manual, Page: 22 / 174

Search results

Summary of Contents for SampleXpress

Reviews: