Bruker SampleXpress, User Manual, Page: 79 / 174

79 Z31900_00_01
Operation
9.5.2.3 Removing Samples in Sequence
This functions allows the removal of samples sequentially in ascending order from a
selected position, until the next empty position is reached.
Figure 9.35 Removing Samples in Sequence from Position
1. Press the Remove button ( Figure 9.16 ) in the main screen.
– The Remove selection screen is displayed.
2. Press the In sequence from position button.
– The Position selection screen appears.
3. Select a white (loaded) position for removing (gray positions are empty positions).
Use the Skip Sample button to skip a sample. Use the Back button to return to the main
menu. See also the figures in chapter "Removing Samples" on page 74 .
9.5.3 Security Eject
The Security Eject function is only active when no BST Sample Down Detection Sensor
was configured in the setup.
After inserting a new cassette or when rebooting the system, the device performs a
security eject to ensure that only one sample is in the magnet. During the security eject,
a message is displayed:
When a sample is found, it is ejected and the position displayed in yellow, so that it still
can be identified when the chain has moved again.