Operating the VIBROCONTROL 1500
VIBROCONTROL 1500
VC1500EN / C103845.002 / V 09 / 14.04.2015
- 43 -
7.12 Setting/Editing measurement channel functions -
Channel
In this menu the parameters of the VIBROCONTROL 1500 instrument can
be edited separately for channel A and channel B.
The settings for both limit values, the relay response lag times, measuring
ranges, input filters frequencies and the values for recognition of the machine
running status for rolling-element bearing condition and trend measurements
are carried out in this menu.
Select the following display using the buttons
and
and confirm with the
button
ENTER
.
Fig. 37: Setup menu for channel settings
In the display the selection of the channel which is to be edited appears. The
desired channel is selected using the buttons
and
and the selection is
confirmed with the button
ENTER
.
Fig. 38: Channel selection
The following display appears. A distinction is made between:
MONITOR
: Measurement channel-specific settings
SENS .
: Sensors-specific settings
Fig. 39: Selection of the setting.