Connections
VIBROCONTROL 1500
VC1500EN / C103845.002 / V 09 / 14.04.2015
- 23 -
Limit 2 relay
27
LIM 2-1
28
LIM 2-2
29
LIM 2-3
Limit 1 relay
30
LIM 1-1
31
LIM 1-2
32
LIM 1-3
OK relay
33
OK 1
34
OK 2
35
OK 3
The connections of the relays are done through three-pole
Phoenix plugs. There is a danger of incorrectly connecting
these plugs to adjacent sockets! If the relay contacts are
connected to dangerous voltage, and the plug is connected
incorrectly, the dangerous voltage could be connected on
the ground connection (Pin 26) of the reset input.
Take care of using the right connection for the relay plugs!
Shield
36
SE
Shield
Power supply
37
0 V
0V for power supply
38
+24V
Positive of 24 VDC power supply
Connection of the power and the shield is done through a
three-pole Phoenix plug. There is a danger of incorrectly
connecting this plug to an adjacent socket! Power must
only be connected through the provided terminals (37 and
38) – otherwise the instrument may be destroyed!