BRP Lynx Rave 600RS 2020, Operator'S Manual

Page: 61 / 188

CONTROLS, INSTRUMENTS AND EQUIPMENT
While recording, one bar of the RH bar gauge constantly moves up-
wards to indicate the gauge is currently recording.
The LH bar gauge acts as a lap counter. One bar means first lap,
two bars means second lap, and so on. A maximum of 8 laps can be
recorded.
If the memory reaches its maximum capacity, the recording will stop
by itself.
Playing Back a Recorded Lap (PLAY)
To playback a recording:
– Enter the lap record mode
– Enter the PLAY function, by repeatedly pushing DOWN the heat-
ing elements switch
– To start a playback, push UP the heating elements switch
– To pass to the following lap (following recording), push UP the
heating elements switch
– To stop a playback, push DOWN the heating elements switch.
If no action is taken during playback, each turn will be displayed one
after the other until the end of the recordings.
While playing back, one empty bar of the RH bar gauge constantly
move upwards to indicate the gauge is currently playing back.
The LH bar gauge acts as a lap counter. One bar means first lap, two
bars means second lap, and so on.
__________________
59