BRP Lynx Rave 600RS 2020, Operator'S Manual

Page: 151 / 188

TROUBLESHOOTING GUIDELINES
ENGINE BACKFIRES (cont’d)
2. Ignition timing is incorrect or there is an ignition system fail-
ure.
– Seek service from an authorized Lynx dealer, repair shop,
or person of your own choosing for maintenance, repair, or
replacement.
3. Exhaust system leak.
– Seek service from an authorized Lynx dealer, repair shop,
or person of your own choosing for maintenance, repair, or
replacement.
4. Fuel pressure too low.
– Seek service from an authorized Lynx dealer, repair shop,
or person of your own choosing for maintenance, repair, or
replacement.
ENGINE MISFIRES
1. Water in fuel.
– Drain fuel system and refill with fresh fuel.
2. RAVE valves malfunction.
– Have RAVE valves system inspected. Seek service from an
authorized Lynx dealer, repair shop, or person of your own
choosing for maintenance, repair, or replacement.
HEATED GRIPS/THUMB WARMERS ARE NOT WORKING
1. Engine RPM is too low.
– Make sure engine RPM is above 2000.
ENGINE HAS SHUT DOWN
1. The engine shuts down after long periods of idling.
– Do not let engine idle too long. Refer to VEHICLE WARM-UP
in OPERATING INSTRUCTION.
WATER PUMP SHAFT OIL LEVEL LOWERS
1. External leak.
– Replace leaking part.
2. Engine internal leak.
– Have the engine bottom end repaired .
_________________
149