BRP Lynx Rave 600RS 2020, Operator'S Manual

Page: 150 / 188

TROUBLESHOOTING GUIDELINES
ENGINE IS CRANKED BUT FAILS TO START
1. No fuel to the engine.
– Check fuel tank level, add fuel if necessary.
2. System voltage too low.
– Contact an authorized Lynx dealer.
ENGINE LACKS ACCELERATION OR POWER
1. Engine warm-up in progress.
– Drive vehicle at low speeds for a few minutes.
2. Engine break-in period not completed.
– Complete break-in period.
3. Drive and driven pulleys require servicing.
– Contact an authorized Lynx dealer.
4. Engine overheats.
– Check coolant level, see MAINTENANCE PROCEDURES.
– Check heat exchangers cleanliness. Clean if necessary.
5. Drive belt worn too thin.
– If the drive belt has lost more than 3 mm (1/8 in) of its original
width, it will affect vehicle performance.
– Replace drive belt.
6. Incorrect track adjustment.
– See MAINTENANCE PROCEDURES and/or an authorized
Lynx dealer for proper alignment and tension adjustments.
7. R.A.V.E. valves problem.
– Seek service from an authorized Lynx dealer, repair shop,
or person of your own choosing for maintenance, repair, or
replacement.
8. Fuel pressure too low.
– Seek service from an authorized Lynx dealer, repair shop,
or person of your own choosing for maintenance, repair, or
replacement.
ENGINE BACKFIRES
1. Engine is running too hot.
– See item 4 of ENGINE LACKS POWER.
148
_________________