BRP Lynx Rave 600RS 2020, Operator'S Manual

Page: 20 / 188

RIDING THE VEHICLE
4. Check fuel level and look for leaks. Replenish if necessary and
in case of any leaks; you should seek service from an authorized
Lynx dealer, repair shop, or person of your own choosing for
maintenance and repair
5. All storage compartments must be properly latched and they
must not contain any heavy or breakable objects. Hood and side
panels must be also properly latched.
6. Activate the throttle control lever several times to check that it op-
erates easily and smoothly. It must return to idle position when
released.
7. Activate the brake lever and make sure the brake fully applies be-
fore the brake control lever touches the handlebar grip. It must
fully return when released.
8. Apply parking brake and check if it operates properly. Leave park-
ing brake applied.
9. Inspect drive belt condition and height, refer to DRIVE BELT in
MAINTENANCE PROCEDURES
.
After Engine is Started
For proper engine starting procedure, refer to
ENGINE STARTING
PROCEDURE .
1. Check taillight, stop light and pilot lamps operation.
NOTE: You may need to detach tether cord from your clothes to
check lights. In such a case, attach cord as soon as you get back at
the controls of the snowmobile.
2. Check the engine cut-off switch (by pulling tether cord cap) and
emergency engine stop switch operation.
3. Release parking brake.
4. Refer to VEHICLE WARM UP and follow instructions.
18
____
SAFETY INFORMATION
____