background image

6 1 9   9 0 0   9 7 3

Original Instructions

20

20

RA

VE

 R

Se

ri

es

®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES.

©2019 BOMBARDIER RECREATIONAL PRODUCTS INC. ALL RIGHTS RESERVED. PRINTED IN CANADA.

619 900 973

OPERATOR’S GUIDE RAVE RS Series / ENGLISH

GUIDE DU CONDUCTEUR RAVE RS Series / ANGLAIS

FAIT AU / MADE IN CANADA 

U/M:P.C.

Read this guide thoroughly.

It contains important safety information.

Minimum recommended operator’s age: 16 years old.

Keep this Operator's guide for reference.

RAVE RS

TM

Series

THIS OPERATOR'S GUIDE IS WRITTEN USING A 

GENERIC FORM AND FOR A GENERAL USE OF THE 

SNOWMOBILE. THE 

RADIEN 600RS

 RACE MODEL 

IS DESIGNED EXCLUSIVELY FOR COMPETITION IN 

A CLOSED COURSE AND CANNOT BE USE WHERE 

ELSE THAN A RACING ENVIRONMENT DUE TO ITS 

DESIGN.

THIS SNOWMOBILE IS INTENDED TO BE 

EXCLUSIVELY USED IN COMPETITIONS AND IS 

EXCLUDED FROM SCOPE OF REGULATION (EU) 

2016/1628 PER ITS ARTICLE 2, PARAGRAPH 2. (K).  

THIS VEHICLE INCLUDING THE ENGINE IS 

CLASSIFIED AS A COMPETITION SNOWMOBILE 

AND SHOULD NEVER BE USED ON PUBLIC TRAILS.

Includes 

Safety, Vehicle 

and

 

Maintenance Information

Operator’s 

Guide

2020

Summary of Contents for Lynx Rave 600RS 2020





























































































































































































Reviews: