Brother MFC 5890CN - Color Inkjet - All-in-One, Service Manual

Page: 227 / 448

6-72
Confidential
Assembling Note: First mount the PE actuator on the gear holder and then set the spring
back into place, using the following steps.
1) Fit either one of the bosses on the PE actuator into the hole in the gear holder, pull the
PE actuator outward, and fit the other one.
2) Lift up the front end of the PE actuator. After fitting the short end of the PE actuator
spring into the groove provided in the gear holder, set the spring back into place, and
then fit the long end into the groove in the PE actuator.
Engine unit
(placed upside down)
Gear
holder
Bosses
PE actuator
(PE actuator_2)
PE actuator
Engine unit
(placed upside down)
PE actuator spring
PE actuator spring
Fit the long end of the
PE actuator spring into
the groove.
Fit the short end of the
PE actuator spring into
the groove.
(PE actuator_3)
Gear holder