Brother Innov-is NV6000D Operation Manual Download

Page: 127 / 376

SEWING THE STITCHES

tili
ty Stit

ch
es

113

■

If the Needle Catches Too Much of

the Hem Fold

The needle is too far to the left.

Press

to decrease the stitch width so that the

needle slightly catches the fold of the hem.

Wrong side of fabric

Right side of fabric

■

If the Needle does not Catch the

Hem Fold

The needle is too far to the right.

Press

to increase the stitch width so that the

needle slightly catches the fold of the hem.

Wrong side of fabric

Right side of fabric

Sew with the fold of the hem against the

presser foot guide.

Remove the basting stitching and reverse
the fabric.

Wrong side of fabric

Right side of fabric

Appliqué

Use a temporary spray adhesive, fabric glue
or a basting stitch to attach the appliqué to
the fabric.

This will keep the fabric from moving during
sewing.

Appliqué

Fabric glue

Select

or .

Adjust the stitch length and width to correspond to
the appliqué shape, size, and quality of material (see
page 66).

Attach presser foot “J”. Check that the
needle drops slightly off the edge of the
appliqué, then start sewing.

Appliqué material

Needle drop position

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” at the end of
this manual.

Summary of Contents for Innov-is NV6000D

























































































































































































































































































































































































Search results

Summary of Contents for Innov-is NV6000D

Reviews:

Related manuals for Innov-is NV6000D

Brands by name

Popular brands

Brother Innov-is NV6000D, Operation Manual

Search results

Summary of Contents for Innov-is NV6000D

Reviews:

Related manuals for Innov-is NV6000D

Brands by name

Popular brands