Brother Innov-is NV6000D, Operation Manual

Page: 300 / 376

EDITING PATTERNS
286
f
Complete repeated patterns by repeating
steps
c
through
e
.
g
Press to finish repeating.
■
Repeating One Element of a
Repeated Pattern
By using the Cut function, you can select one
element of a repeated pattern and repeat only that
single element. This function allows you to design
complex repeated patterns.
a
Choose the direction in which the repeated
pattern will be cut.
* Press to cut horizontally.
* Press to cut vertically.
o
The pattern direction indicator will change
depending on the direction selected.
b
Use and to select the cut line.
o
The cut line will move.
Memo
• When there are two or more patterns, all
patterns will be grouped together as one
pattern in the red frame.
• When changing the direction in which the
pattern will be repeated, all of the patterns in
the red frame will automatically be grouped
as one repeating unit. Press to change
a repeated pattern back to one single pat-
tern. See the following section on how to
repeat one element of a repeated pattern.