Brother Innov-is NV6000D, Operation Manual

Page: 314 / 376

VARIOUS EMBROIDERING FUNCTIONS
300
n
With the machine threaded using the thread
for the outline from step
l
, sew the outline
(APPLIQUE).
a
Outline of appliqué piece
o
After embroidering is finished, remove the
stabilizer material from the embroidery
frame.
p
Use scissors to cut the excess water-soluble
stabilizer from outside the appliqué outline.
q
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
r
Dry the appliqué piece, and then iron it if
necessary.
■
Using a Frame Pattern for the Out-
line
Using a frame pattern, the desired shape can be
added as the outline of the appliqué.
a
Perform the operations described in steps
a
through
d
of “Creating an Appliqué
Piece” on page 296.
b
Select the desired frame shape and pattern,
and add it to the appliqué pattern.
Memo
• The outline is sewn using satin stitching.
• Some glue may get onto the presser foot,
needle, and needle plate at this time. Finish
embroidering the appliqué pattern, and then
clean off the glue.
Note
• Do not apply a strong force when ironing,
otherwise the stitching may be damaged.