Brother Innov-is 2500D, Operation Manual

Page: 21 / 221

LCD SCREEN
20
Using the Machine Setting Mode Key
Press to change the needle stop position, turn the buzzer on/off, adjust the pattern or screen, and change
other basic machine settings.
a
Select whether the needle stops in the raised or
lowered position when the machine is stopped.
b
Select whether to use the sewing speed controller or
to adjust the zigzag width (see page 69).
c
Make adjustments to the character and decorative
stitch patterns (see page 99).
d
Adjust the presser foot height (select the height of the
presser foot when the presser foot is raised) (see
page 43).
e
Adjust the presser foot pressure between 1 (weak)
and 4 (strong).
* The higher the number, the greater the pressure will be. Set
the pressure to 3 for normal sewing.
f
Select whether “1-01 Straight stitch (Left)” or “1-03
Straight stitch (Middle)” is the utility stitch that is
automatically displayed when utility stitch is selected.
* Press to display the next page.
a
Select from among 10 embroidery frame displays
(see page 134).
b
Select whether the thread color name, thread color
number or sewing time appears for the thread color
display in the embroidery screen (see page 151).
c
Select the thread brand available when selecting a
thread color number in the thread color display of the
Embroidery screen (see page 151).
* Press to display the next page.
a
Adjust the maximum embroidering speed
(see page 151).
b
Adjust the thread tension for embroidering
(see page 149).
c
Adjust the height of embroidery foot “U”
(see page 129).
d
Select the units (mm/inch) for displaying distances
and the sizes of embroidery patterns.
e
Select the initial screen (Embroidery/Embroidery Edit)
when the embroidery unit is installed.
* Press to display the next page.
c
b
a
e
d
f
a
b
c
a
b
c
e
d